Chip Tuning Box OBD2 V4 Qashqai |+2 (J10) (2007-2013)

Το νέο OBD2 v4 Chip Box είναι το νεότερο,  και πιο εξελιγμένο κουτί τσιπ που διατίθεται στην αγορά. Το OBD2 v4 χρησιμοποιεί έναν γρήγορο και αποτελεσματικό μικροεπεξεργαστή 20 MHz με ενσωματωμένη μνήμη flash που περιέχει έναν τρισδιάστατο χάρτη που ονομάζεται ignition Map.

Μετά την εγκατάσταση, το OBD2 v4 επικοινωνεί με τον υπολογιστή του αυτοκινήτου (ECU) μέσω του OBD2 CAN BUS και προσαρμόζει τις κατάλληλες παραμέτρους από τη μνήμη Flash. Δεν αλλάζει τον αρχικό χάρτη της ECU.

Για να δημιουργηθεί μια σωστή επικοινωνία μεταξύ του Chip Box OBD2 v4 και της ECU του αυτοκινήτου, είναι σημαντικό η διαγνωστική θύρα OBD2 στο αυτοκίνητο να είναι εξοπλισμένη με το Can-Bus .


Κωδικός Προϊόντος : chippower qashqai-1 Category

Για τοποθέτηση παρακαλούμε επικοινωνήστε μαζί μας στο 2310748023 και κλείστε ένα ραντεβού

Δωρεάν Μεταφορικά για αγορές άνω των 100€ και μέχρι 6 κιλά . Μεγάλα δέματα δεν στέλνονται Aντικαταβολή !


The new OBD2 v4 Chip Box is our newest, most universal and sophisticated chip box available on the market. The OBD2 v4 uses a fast and efficient 20 MHz microprocessor with a build-in flash memory containing a 3D map called the ignition Map.

After the installation, the OBD2 v4 communicates with the car’s computer (ECU) through the OBD2 CAN BUS and adjusts appropriate parameters from the Flash memory. It does not change the original ECU map.

To establish a proper communication between the Chip Box OBD2 v4 and the car’s ECU, it is crucial that the diagnostic port OBD2 in the car needs to be equipped with the Can-Bus which means at least 8 pins.

Chip Box OBD2 V3 Petrol - features   Up to 15 – 20% more power.
Chip Box OBD2 V3 Petrol - features   Redcued turbo lag.
Chip Box OBD2 V3 Petrol - features   Fuel consumption reduced by 10-15% depending on your car.
Chip Box OBD2 V3 Petrol - features   Up to 15 – 20% more torque.
Chip Box OBD2 V3 Petrol - features   Fully Digital (microprocessor 2oMHz).
Chip Box OBD2 V3 Petrol - features   Comes with original connectors.
Operating voltage of the microprocessor: from 2.5V to 5.5V (stabilized – 0.5V).
Power supply: 8-15V DC.
Current consumption through the device: 0.2A.
Comunication protocol: OBD II CAN.
Operating temperature range: From -40 to +85 degrees C.
OBD device is our flagship product.
It uses a fast and efficient processor 20MHz with built-in flash memory, which is a three-dimensional cable called the ignition map.
This map contains information describing the dose of the fuel injection depending on the ner of the actual parameters, such as:
  • supplied air temperature,
  • current air density,
  • engine speed,
  • throttle position.

Connect the black 9 pin plug connector in to the OBD2 v4 device and secure it with the screws. Locate your OBD2 diagnostic port. Usually it can be found at the driver’s side under the steering wheel. If you are not able to locate it, you can check in the car’s manual. Connect the OBD2 v4 Chip Box’s 16 pin connector to the diagnostic port in the car.


Make sure it’s firmly attached. Proper connection should be indicated by turning on the LED lights on the Chip box. The signaling of the LEDs may differ depending on the car brand, year of manufacture and ECU drivers type. Insert the key to the ignition and turn it to the ON/AAC position, but do not start the engine yet.


Now press and hold the reset button for about 5 sec. It is located on the top of the circuit board. After releasing the button, please wait for about 30-60 sec so that the Chip box will establish a stable communication with the ECU.


Start up the engine and enjoy driving. The OBD2 v4 chip box from that moment will start to adjust itself to your driving habits. It will take approximately 150 to 200 km to improve your car’s fuel economy and performance.


Compare OBD2 to chiptuning and chip box device to choose the best solution for you.


  • After removing the chip box your car returns to the factory settings.
  • You can control the change.
  • You can quickly remove it.
  • You can install it in another car.
  • You can install the device yourself.
  • 3D map stored in flash memory.
  • Fully digital processor.
  • Much cheaper than chiptuning.


  • Installed in a driver cabin, without opening the hood.
  • Fully digital processor.
  • The change of the parameters from many sensors at the same time.
  • Fast mounting and dismounting.
  • You do not get your hands dirty.

Επιπρόσθετες Πληροφορίες

Μοντέλο Αυτοκινήτου

, , , , , , , , ,

Make Model Year
Nissan Qashqai 2008 - 2021